Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shimomura, Yusuke; Sato, Takuya; Fukui, Yasutaka; Kudo, Kenji; Yoshioka, Tatsuji
JAEA-Review 2018-023, 220 Pages, 2019/01
JAEA-Review-2018-023.pdf:15.6MB
On September 11, 2015, leaky traces of bituminized wastes were confirmed from four drums filled with bituminization in waste packages storage yard (II) of waste management facility in Oarai Research and Development Center. Moreover, even after the subsequent investigation, a leakage trace was found from one bituminous drum on November 10, 2015. Furthermore, on December 2, 2015, there was no a leakage trace in one bituminous drum, however the upper lid was found to be intensely corroded. To investigate the causes and the countermeasures for leakages of bituminized wastes from the drums, we have set up a Work Group to investigate the causes and the countermeasures to leakage traces from the drums. This report is based on "Report on Cause Investigation and Countermeasure of Leakage Trace from the Drum" summarized by this working group, the report was reconstructed including the contents clarified in the subsequent document investigation.
Koyama, Tomozo; ; Omori, Eiichi; ; ; Shibata, Atsuhiro; Shigetome, Yoshiaki
JNC TN8410 99-027, 423 Pages, 1999/12
The bituminization demonstration facility of Tokai Reprocessig Plant had a fire and explosion incident. The cause of the incident was investigated. Also, the facility condition and release of radioactive materials were evaluated. The cause of the fire and subsequent explosion was determined in a two year investigation. The main cause of the fire was that the temperature of the bituminized product rose to an unusually high temperature by a physical heating phenomena inside the extruder, which was caused by the lowering the feed rate of liquid waste. A moderate chemical reaction in the bituminized product continued and consequently the bituminized product overheated and ignited. The cause of the explosion was the accumulation of flammable gases generated from insufficiently extinguished bituminized product in the filling room in which the ventilation system had been shut down. The flammable gas was ignited by another bituminized product that overheated to the flash point temperature. This report details the condition of the facility before and after the incident, cause of the incident, and an evaluated amount of released radioactive materials.
; ;
JAERI-M 8864, 13 Pages, 1980/05
no abstracts in English
; ;
Journal of Nuclear Science and Technology, 14(2), p.125 - 130, 1977/02
no abstracts in English
Irisawa, Keita; Meguro, Yoshihiro
no journal, ,
no abstracts in English
Sugaya, Atsushi
no journal, ,
Give a presentation on management of the Bituminized Waste in the Tokai and Safety assessment for disposal.
